Photoshop tutorial-20{ use of pen tools on photoshop}
You are about to tackle one of the tougher tools
within Photoshop, the Pen Tool. Because we are a beginner/intermediate
site, today we are just going to go over the basics of how to use the
Pen Tool to make a selection. Back in the
Text Features
tutorial, we showed you how to type on a Path and you created the Path
using the Pen Tool. Today we take you 1 step closer to learning this
feared tool.
Currently we are using Windows Vista Home Premium 64 Bit and the Photoshop CS4 Extended 64 Bit version.
Knowledge You Need to Know:
If
you are unfamiliar with certain areas that are not covered in this
tutorial, feel free check out other tutorials on our website. We have
many different types of tutorials that can be downloaded (Video, PDF) or
viewed online that will train you for
free! Once you have the knowledge, feel free to come back and go through this tutorial again.
Preparing For This Tutorial:
Open
the PE-IMAGE.jpg. This should have 2 different objects in the image. If
you do not have this image, please use the “Download Supporting Files”
option located on the bottom of the tutorial.
Why More Of The Pen Tool Features Now?:
We
debated if we should show you more o the Pen tool and we agreed that it
was time to show you a little bit more about the Pen tool, but limit it
to making selections. Back in
Text Features
tutorial we showed you how to use the Pen tool to type on a path.
Today, we will show you how to make a selection. Due to the fact we have
showed you the other ways to select an image, we felt before we take
the next step into another subject, that we should show you how to
select with the Pen Tool. In the future, we will show even more features
of this tool.
Terminology:
We
truly do not want to overload you with Pen terminology in this
tutorial, so we are just going to teach you 2 new terms. When you see
dots (either a white or gray dot) at the end of the line, these are
called “Anchors”.
The next term is “Segments”. Basically a segment is the line in between the anchors.
Straight Line Selection:
Let’s
show you how to do a straight line selection. This is by far the
easiest to understand. Our goal here is to make a triangle selection
around the red triangle in the image. Please make sure you have the
PE-IMAGE.jpg opened.
In
the toolbox, towards the middle left hand side on a 2 column toolbox,
you will find the Pen Tool image. Right click this image and Left click
the “Pen Tool” command.
Photoshop Tip - To use the keyboard shortcut, press the “P” key.
Our first goal is to make a selection around the triangle using the Pen Tool. You should now have the following image open.
On the bottom left hand side of the triangle, single Left click the corner. You should see an anchor (dot) will be displayed.
Now
hold down the “Shift” key (this forces it to be a straight line) and
single Left click the second point which is the bottom right hand corner
of the triangle.
Now onto the 3
rd anchor which is at the top of the triangle. Hold down the “Shift” key and single Left click to create the top anchor.
Move
your mouse to the starting anchor, and you will notice the Pen Tool
will change. It will show the Pen Tool and it will have “o” to the right
of it. Single Left click the starting anchor, while holding the “Shift”
key.
Now
you need to tell Photoshop that your anchor points are for a selection.
Right click while using the Pen Tool and Left click “Make Selection”.
You will then see a “Make Selection” dialog box will be displayed.
| A). If you want to blur the edges, Left click this box and enter a value. For this tutorial, please use 0.
|
| B).
Anti-aliased when checked allows Photoshop to smooth the edges of the
selection. On this example, please make sure this box is checked.
|
| C).
If you are happy with your changes, Left click the “OK” button and if
you want to make changes to the selection, Left click the “Cancel”
button.
|
You
will know see the area is selected and the marching ants will be
displayed. See the Pen Tool is not that bad! The key to learning the Pen
Tool is to break it up into different sections and not to bombard you
will a lot of information or terminology at once.
Curved Selection:
Now
it is time to use the Pen Tool to select the bottom shape in the image.
Before you proceed, please use CTRL-“D” to deselect the triangle.
It is very important to read each step very carefully. Start of by using the Pen Tool and single Left click the bottom point of the object. You will see a new anchor will be added.
Now, please read this section very carefully!
| A). Hold down the “Shift” key on the keyboard and Left click and HOLD the mouse button for the 2nd anchor point (anchor should be in the top center of the object).
|
|
B).
Your still holding the Left mouse button, right? If not, do a CTRL-“Z”
to undo. We want you to drag the mouse to the right first. You should
see it to begin to curve. Move the mouse up and down and left and right
to align the curve. Now release the Left mouse button.
|
There
are 2 ways to finish this with the Pen Tool. 1). Left click the
starting anchor and use A) and B) from above or 2). Single Left click
the starting anchor (this is much easier to do, but it will not allow
you change the curve).
Now follow the instructions above to “Make Selection” (Right click, select “Make Selection”).
Conclusion:
You
may be wondering, what are the other options in the Pen area of the
toolbox. Let’s not worry about those other tools for now. It is very
important to teach you the Pen Tool in stages. Remember, back in the
Text Features
tutorial we showed you how to use the Pen Tool and to type on a Path
and now you know how to make a straight and a curved selection. In time
you will learn more terminology and more features of the Pen Tool.
Some
people might be disappointed that we did not show you everything about
the Pen Tool, but from our experience, if a beginner user is showed
everything about the Pen Tool, most of the beginner/intermediate users
become frustrated with the tool. End result these users will never use
the Pen Tool ever again, even though the Pen is a powerful tool within
the Photoshop program.
Are
you itching to learn more about the Pen tool? Well first let’s make
sure you truly understand how to curve or how to make a selection. One
recommendation is that you download an image that is round (an apple, or
a Frisbee, etc.) and try to make the selection off of those images.
1). How do you make a straight line with the Pen tool?
| A). Hold down the CTRL key while single Left clicking the next point.
|
| B). Hold down the ALT key while single Left clicking the next point.
|
| C). Hold down the “FN” key while single Left clicking the next point.
|
| D). Hold down the “Shift” key while single Left clicking the next point. |
2). When you Left click a spot with the Pen Tool it creates a dot or a point which is actually called a?
| A). Segment.
|
| B). Anchor.
|
| C). Curvature Point.
|
| D). Handle. |
3).
When you are about ready to Left click the starting point after you
have made at least 2 points, what does the pointer change to?
| A). Shows Pen Tool with a “+” to the right of it.
|
| B). Shows Pen Tool with a “-“ to the right of it.
|
| C). Shows Pen Tool with a “o” to the right of it.
|
| D). Shows Pen Tool with a “)” to the right of it. |
4). After you have Left clicked the starting point, how do you tell Photoshop to make it a selection?
| A). Right click with the Pen Tool and Left click “Make Selection”.
|
| B). Right click with the Pen Tool and Left click “Create Selection”.
|
| C). In the Layers palette, select the “Selection” icon.
|
| D). Drag the selection to the Layers palette and it automatically creates a selection. |
5). What does “Feather Radius” mean in the make selection dialog box?
| A). It will draw feathers of a bird around the edges.
|
| B). It creates a smooth edge to the selection.
|
| C). It creates a blur to the edge.
|
| D). It increases the selection by X amount of pixels, so it can create a larger selection. |
6). What does the Anti-aliased do in the make selection dialog box?
| A). It adds a watermark (copyright) to the image.
|
| B). It adds a blur to the edges.
|
| C). It forces Photoshop to resample the selection and it does a better job at selecting the edges.
|
| D). It smoothes the edges of the selection. |
7). What is it terminology called in between the anchors?
| A). Line.
|
| B). Selection.
|
| C). Segments.
|
| D). Pen Line. |
8). How do you create a curved line with the Pen Tool?
| A). Right click the next point.
|
| B).Single Left click the next point and then hold down the “Shift” key to curve the line.
|
| C). Double Left click the next point and then select “Curve” from the dialog box.
|
| D). When Left clicking the next point, hold down the Left mouse button and drag up or down or left or right. |
9). If you make an error, what is the easiest way to go back one step?
| A). CTRL-“Z”.
|
| B). CTRL-“U”.
|
| C). ALT-“U”.
|
| D). “Z”. |
10). What is the keyboard shortcut to use the last active Pen Tool?
| A). CTRL-“P”.
|
| B). “P”.
|
| C). ALT-“P”.
|
| D). CTRL-ALT-“P”. |
Answers: 1). D, 2). B, 3). C, 4). A, 5). C, 6). D, 7). C, 8). D, 9). A, 10). B
Source: go
No comments:
Post a Comment